Cat 5e LAN Lack

Features:

Category 5e

An improved specification to Category 5 was later introduced. By reducing noise and signal interference, Category 5e was capable of increasing rated transfer speeds to 350 Mbit/s over 100 meters. The new standard also required all cables to include four twisted pairs (all eight contacts). An optimized encoding scheme allows up to 50-meter lengths of Category 5e cable to perform at, or near, Gigabit Ethernet (1000BASE-T) speeds.

Category 6

The mainstream adoption of Gigabit Ethernet (1000BASE-T) required new industry-standard cables capable of transmitting at a higher frequency of 250 MHz. Category 6 cable uses thicker-gauge wire, increased shielding, and more pair twists per inch to reduce signal noise and interference. The tighter specifications guarantee that 100-meter runs of Category 6 are capable of 1000 Mbit/s transfer speeds. 10-Gigabit Ethernet speeds are achievable when reducing cable lengths to less than 50 meters.

• Contacts material – Copper alloy and gold plated.
• Condition of tests – Peak, between contacts.
• Communication Network Category – 5e and 6
• These modular jacks are universal colour coded for both 568A and 568B standards.
• Clear wire retaining caps are supplied and can be used to provide additional cable strain relief.
• The Jack consists of 4 pairs of solid insulated copper Cable 23 AWG.
• Delivering the best network performance when used in conjunction with other.
• Fitted with quality terminals for smooth holding, properly aligned.
• Prevents dust ingress.
• Fresh & top quality FR (Flame Retardant) Poly Carbonate (PC) has been used for manufacturing.
• Screws & Terminals are tested by GO-NO-GO gauge apparatus.
• No effect of weather conditions.